|
| |
Sights
We stock a variety of sights as a convenience to our customers. These are installed
free if bought from us.
| |
Price |
Baldwin
mid range tang sight |
415 |
Baldwin
long range tang sight |
485 |
Baldwin
front sight with spirit level |
155 |
Hoke
mid range tang sight |
415 |
| Hoke long range tang
sight |
425 |
Lyman
17A front sight |
30 |
| Lyman 20 MJT globe front
sight |
39 |
Lyman
93 MJT globe front sight |
49 |
MVA
Schuetzen Soule tang sight (short range) |
375 |
MVA
Midrange Soule tang sight |
425 |
MVA
Long range Soule tang sight |
457 |
MVA
#115 Stevens globe front sight |
96 |
MVA
#116 Stevens globe front sight, spirit level |
167 |
MVA
Hadley eyecup |
74 |
Shaver
LS17500 front sight with internal level |
100 |
Sight Adapters
 |
 |
 |
| Redfield Sight Adapter |
Anschutz Sight Adapter |
Front Sight Base shown
with sight attached |
| Rear sight adapters are made for the Anschutz rear sight.
These are supplied to mount on either cup style rear scope bases used by Lyman, Fecker and
most Unertl, or on the Posa style used by some Unertl and all Redfield scopes. They are
machined from solid steel and are low luster blued. The attaching screw turns on a set
screw which is easily replaced if broken. The use of steel makes a stronger and more rigid
adapter than one made of aluminum; steel is one third as flexible as aluminum and much
stronger and more attractive as well. These are placed on the rear scope mount placed just
ahead of the frame of the rifle. The Redfield type is offset the correct distance to the
left to accommodate the "gallows arm" of the sight, and has five mounting holes
to allow the sight to be placed in the correct position fore and aft. The Anschutz type
accommodates this excellent sight in the center position, allowing it to be slid to the
correct position. The line of sight of these adapters is full scope height, giving a
common face position with your scope. |
 |
| Front sight adapters allow the common front
sights which measure about 9/16" from the top of the dovetail cut to the center of
the sight. This type includes the Redfield International and Olympic, the Mo's front sight
with spirit level, and any other sight of the same measurement. They are milled from solid
steel, polished and case colored to match the CPA scope bases. The adapter is drilled and
tapped for a set screw to lock it into place when slid into a 3/8" dovetail; this set
screw uses a 1/16" Allen hex wrench. Height of the base matches the rear adapter. Standard height is .475", but also available in .365" and .420"
heights.
|
 |
|
Price
|
| CPA rear sight adapter for
Redfield, etc. |
95 |
| CPA rear sight adapter for
Anschutz |
95 |
| CPA front sight base, scope height |
35 |
Scope Bases
| CPA scope bases are made in low height for either octagon of
round barrels. These are milled from solid stock and are carefully polished and color case
hardened. They come with mating hardened 6-48 screws, and are sold in sets of two with
.860 and .562 hole spacing. The bases are cup style on one side and Posa on the other,
allowing them to fit any external adjustment scope made within the last 60 years. |
 |
| |
Price
|
| Polished and color hardened scope bases for
Lyman, Unertl and Fecker scopes, low height only, specify octagon or round barrel |
35 |
| Weaver 63-B base modified |
15 |
Prices are not guaranteed and are subject to change without notice.
|
